Cyclic Corrosion Tester for NSS Test/Neutral Salt Spray Tester
Product Introduction:
Factory outlet salt spray tester is ideal for testing the resistance to salt spray corrosion of some products by measuring and comparing similar materials, their usability quality. It is applicable to test salt spray corrosion resistance of such products as parts, electronic components, protective layer of metallic material and industrial products.
Product Standard:
GB/T2423.17-2008 GB/T 2423.18-2000
GB/T10125-1997 GB/T10587-2006
GB10593.2-1990 GB/T1765-1979
GB/T1771-2007 GB/T12967.3-2008
GB/T5170.8-2008 IEC,MIL,DIN,ASTM, etc
Body specification (60/90/120)
60:inner box: 600*450*400(L*M*H) outer box: 710*560*560(L*M*H)
90:inner box:900*600*500(L*M*H) outer box:1050*750*600(L*M*H)
120:inner box:1200*1000*500(L*M*H) outer box:1350*1150*600(L*M*H)
Control system
1. HDT temperature controller
2. Digital display PID automatic calculation,
3. SSR output
4. High-stability platinum temperature probe.
5. Temperature error: ±1℃
6. Pressure Tank adopts Henry's Law, temperature and humility easy to adjust, testing temperature reach up to 95%, with national standard met.
Water supplement system:
Automatic and manual water supplement system can keep the test continuous, meeting clients’ various environmental requirements. (With a tap water pipe ready under automatic water supplement)
| Model | SM-Y-60D | SM-Y-90D | SM-Y-120D | SM-Y-160D | SM-Y-200D | | Inner size | W | 600 | 900 | 1200 | 1600 | 2000 | | D | 450 | 600 | 850 | 1000 | 1200 | | H | 400 | 500 | 500 | 550 | 600 | | Outer size | W | 1130 | 1460 | 2200 | 2600 | 3000 | | D | 630 | 910 | 1200 | 1450 | 1650 | | H | 1070 | 1280 | 1450 | 1550 | 1600 | | Testing room volume(L) | 108 | 270 | 480 | 800 | 1440 | | Brine tank capacity(L) | 15 | 25 | 40 | | Max current(A) | 5 | 12 | 15 | 18 | 22 | | Max Consumption Power(KW) | 1.5 | 2.5 | 3.5 | 5 | 7 | | Power supply | AC220V,50HZ | AC380V,50HZ | | Operating ambient temperature, humidity | <35℃,<85%RH | | Testing room temperature | Brine test method(NSS ACSS)35℃±1℃/Erosion-resistant testing method (CASS)50℃±1℃ | | Pressure Pot Temperature | Brine test method(NSS ACSS)47℃±1℃/Erosion-resistant testing method(CASS)63℃±1℃ | | Brine solubility | 5% Sodium Chloride Solution or add 0.26 grams copper dichloride in the 5% Sodium | | Chloride Solution per liter (CuCl2 2H2O) | | PH | 6.5~7.2 3.0~3.2 | | Compressed air pressure | 1.00±0.01kgf/cm2 | | Spray quantity | 1.0~2.0ml/80cm2/h (Collect 16 hours at least, take their average) | | Inside and outside material | Imported corrosion resistant, anti-aging, | | high strength PVC board | | Heater | Corrosion resistance U type titanium tube | | Temperature controller | LED digital display temperature controller, touch screen controller | | Spraying mode | Continuous,intermittent spraying | | Defrosting device | No | Yes | | Safety device | Over temperature protection switch, leakage protection, status warning lamp | |
Product Catalog:
Salt Spraying Chamber.pdf
Product Tags:
|
|
Cyclic Corrosion Test Chamber For Testing Metallic Material Protective Layer Images
|
